"I've got this Tannoy subwoofer, it crackles and pops. Can you take a look?"
Yeah - why not......
It's a smallish cube, mounted on little cones, with a downward facing speaker...
I powered it up, and all was quiet.
Just as I was about to connect the signal generator, I heard thunder in the distance .... and it got louder and louder! The speaker was popping and crackling alright. I quickly powered down.
I removed the screws around the outside of the rear panel, to reveal the speaker. The electronics and amplifier are mounted on the rear panel itself....
Removal of the board showed signs of distress....
Q151 and Q152 and there associated components had been running rather warm! The colour of the cases of the transistor should be black, you can see in the photo that they've changed to a sort of powdery brown.
Q151 is a 2S1815, NPN, and Q152 is it's complementary PNP, a 2SA1015.
Static testing on the transistor tester showed both to be fine. But the fault seemed to exist only when the thing was drawing current, so I threw caution to the wind and replaced both transistors. The two diodes, the two resistors and the caps all tested within tolerance.
Switch on again, and it's cured!
In the above picture, you can see two wire links across F152 and F153, where there was place for a couple of fuses. The wire links are original, so the fuses were obviously deemed unnecessary, relying on the non-replaceable thermal fuse in the transformer...
Not sure I like that idea much....
*** STOP PRESS *** 12th May 2020.
Many, many people visit this site to look at this page, and, sadly can't find the correct transistors.
The SCA1015 is obsolete, a KSA1015YTA is still available.. https://uk.rs-online.com/web/p/bjt-bipolar-transistors/8064403. You can try a BC556, but you need to fit it backwards, and reverse pins 1 & 2 (Check the datasheets)
The 2SC1815 is still available from mouser, or you can fit a BC546, again reversing the leads. (Check the datasheets).
These transistors are pushed hard in this application. When (if) I ever see another one, I'll look for a better solution.
*** STOP PRESS *** 13th January 2021.
PeterCB has been working on his subwoofer, and replaced the 2SA1015 with a TIP32, and the 2SC2818 with a TIP31.
"So I went ahead and replaced the transistors with TIP31C/32C in a TO220 package. Been soak testing for about six hours now, they don't even get warm. The new transistors fit perfectly in place of the originals, just facing the opposite way, see picture"
Thanks PeterCB!
*** STOP PRESS 15th March 2021 ***
Avid reader Springknees has kindly created a schematic of the offending power supply section.
It can be found at https://www.chantrybarn.co.uk/woofer.php and is reproduced here with permission.