tag:blogger.com,1999:blog-7361237673474611033.post1227399313588675112..comments2024-03-25T09:10:23.746+00:00Comments on Doz' Blog: Mitsubishi HS-M60V repair.Dozhttp://www.blogger.com/profile/01517789746939070858noreply@blogger.comBlogger17125tag:blogger.com,1999:blog-7361237673474611033.post-71555059879377676032024-02-13T11:01:43.899+00:002024-02-13T11:01:43.899+00:00Hi again.
Finally, the deck came out... and the l...Hi again. <br />Finally, the deck came out... and the loading belt is changed. But I think, the hole loading mechanism is very slow. Like there"s not enough power to load or eject the cassette. It was slow, before I got it repaired. Is this just normal with this model?<br />Kind regards, PatrickAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-67808614828129484872024-02-05T08:27:16.044+00:002024-02-05T08:27:16.044+00:00Hi again :-)
Sorry, I'm asking again. I'v...Hi again :-) <br />Sorry, I'm asking again. I've still not removed the deck. The multipins on the deck are really stuck... Do I have to pull the deck straight up? <br />Cheers, Patrick Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-78725902176081808392023-06-06T08:24:23.016+01:002023-06-06T08:24:23.016+01:00Thanks =0) Should I just pull upright or turn it a...Thanks =0) Should I just pull upright or turn it a little bit over the optical thing? The multipins seems to turn over. Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-72529241080377242742023-05-26T07:41:57.364+01:002023-05-26T07:41:57.364+01:00The whole deck should now just pull off. My loadin...The whole deck should now just pull off. My loading belt has worn out again, so I'm going to be doing this again soon. Dozhttps://www.blogger.com/profile/01517789746939070858noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-88823912447137913442023-05-11T08:32:59.455+01:002023-05-11T08:32:59.455+01:00Hi again. Finallly, the end sensor cable came off....Hi again. Finallly, the end sensor cable came off... Now I am struggle with the multi pin connectors. They cant get off. Really tight. Shall I just lift upright? Kind regards, Patrick Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-67012937396293377762023-05-09T19:08:21.589+01:002023-05-09T19:08:21.589+01:00Hi again =0) The end sensor cable finally came off...Hi again =0) The end sensor cable finally came off. But the multipins are really stuck. Shall I just pull upright? I am afraid, they break. <br /><br />Sincerely, Patrick Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-2244811608111839992023-04-24T08:45:26.522+01:002023-04-24T08:45:26.522+01:00It's likely that the mode switch is giving a n...It's likely that the mode switch is giving a noisy signal. It needs to be removed, disassembled and cleaned up. Try to find a youtube video on another machine where they describe the mode switch (sometimes called a mode select switch), this will show you what you're looking for. Either way, with this mechanism, the deck will need to come out.Dozhttps://www.blogger.com/profile/01517789746939070858noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-60394424976792503162023-04-23T18:17:28.438+01:002023-04-23T18:17:28.438+01:00Thanks for answer =0) But it is the connector, tha...Thanks for answer =0) But it is the connector, that is stuck. I’m affraid to pull hard. When I eject some tapes, the tape comes out shortly, and being pulled back in the video. Sometimes 3 times, before I can take the tape out. Is it just the belt, that should be replaced? And sometimes the video automatic play, when a tape is inserted, and sometimes not. And sometimes the L and R is missing in the display. It’s really strange sometimes. The display is also dark, like it is burned out. What to do? Sincerely Patrick Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-69754658070784241332023-04-06T08:09:00.295+01:002023-04-06T08:09:00.295+01:00Hi Patrick. The end sensor is optical, not a physi...Hi Patrick. The end sensor is optical, not a physical switch as such. It's connector should just unplug and you can lift the whole mech clear of the PCB.Dozhttps://www.blogger.com/profile/01517789746939070858noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-6471949361046612082023-04-04T19:55:30.127+01:002023-04-04T19:55:30.127+01:00Hi.
Great site! I have just the same video, and w...Hi. <br />Great site! I have just the same video, and want to lube it and change the belts. But now I can’t get the end sensor switch off. I’m afraid to wreck something. And the cassette loading thing is stuck to the board with 2 wide switches. I just don’t want to pull it off, if I break something. <br /><br />Kind regards,<br />Patrick from Denmark Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-69523353466665264302022-01-13T13:42:05.552+00:002022-01-13T13:42:05.552+00:00Indeed they are ... I had to make my belts up out ...Indeed they are ... I had to make my belts up out of CPC's selection. The loading belt is still available here ... https://www.donberg.ie/descript/7/7205.htmDozhttps://www.blogger.com/profile/01517789746939070858noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-82372604217056901392022-01-13T12:32:12.905+00:002022-01-13T12:32:12.905+00:00My HS-M60V has replaced its belts with a goo.
Real...My HS-M60V has replaced its belts with a goo.<br />Really looking forward to cleaning that up!<br />Can you suggest a UK source for replacements, notobsolete appear to now be obsolete!Just Stevehttps://www.blogger.com/profile/11111841064017164164noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-84628590631155456862020-10-01T18:05:32.858+01:002020-10-01T18:05:32.858+01:00Hi,
Thanks so much for this site - I was strugglin...Hi,<br />Thanks so much for this site - I was struggling to find out how to remove the deck from an M50V - there are 3 screws underneath as well as the 5 on top!<br />All the belts had turned to a horrible tarry mess & there is no way to sort this without removing the deck from the unit.<br /><br />Tim.Anonymoushttps://www.blogger.com/profile/05586845838693997077noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-65581828922645867382020-02-29T23:02:51.498+00:002020-02-29T23:02:51.498+00:00I liked Mitsubishi video recorders from my limited...I liked Mitsubishi video recorders from my limited experience renting them, but found that the satellite control function, where fitted, sometimes, or on some models nearly always, changed code at random. One that did so brought to an end my rental days. I had no idea about any that were good with system A.<br /><br />I switched to Panasonic when I started buying video recorders - my last working one is a combination DVD machine as well.Phil Reynoldshttps://www.blogger.com/profile/07080812032624786351noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-12401274405720262022019-11-15T11:25:23.247+00:002019-11-15T11:25:23.247+00:00È per il drive della bobina. Puoi cambiarlo se non...È per il drive della bobina. Puoi cambiarlo se non è riuscito. Questo era ancora buono.Dozhttps://www.blogger.com/profile/01517789746939070858noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-2397343797183741452019-11-15T11:24:07.855+00:002019-11-15T11:24:07.855+00:00This comment has been removed by the author.Dozhttps://www.blogger.com/profile/01517789746939070858noreply@blogger.comtag:blogger.com,1999:blog-7361237673474611033.post-7535778109237175352019-11-14T18:03:38.389+00:002019-11-14T18:03:38.389+00:00la cinghia più lunga a cosa serve? non è il caso d...la cinghia più lunga a cosa serve? non è il caso di cambiare anche quella?Anonymoushttps://www.blogger.com/profile/00255267952460687312noreply@blogger.com